A torque and fastener reference for the Caterham Seven. Set your model, engine and chassis spec, then ask Colin for any figure — shown with its bolt size and the manual it came from, so you can check it against the fastener in your hand.
Torque and fastener data taken straight from Caterham build and assembly manuals — scoped to your car, in the units the manual gives, with the source on every answer.
Type or speak a fixing — "front lower damper", "driveshaft nut", "bellhousing" — and get the torque straight back. No scrolling through a PDF at the car.
Pick your model, engine and chassis spec once. Figures are filtered so you see the fixings that apply to your car — Imperial or Metric — not someone else's.
Every answer shows the bolt size and the manual it came from, so you can sanity-check it against the fastener in your hand before you reach for the torque wrench.
Crank, flywheel, clutch, cam-cover and bellhousing figures for X-Flow, K-Series, Sigma, Duratec, Vauxhall and Suzuki fitments — shown only for the engine you've selected.
Prefer to read down a list? Browse fixings grouped by system — front suspension, steering, differential, rear axle, engine — for your chosen spec.
Everything runs on the device. No account, no sign-in, no internet needed — so it works in the workshop, the paddock or the trailer.
Colin — your Caterham companion
SevenSense is published by RaceTracs Ltd. Its torque and fastener figures are transcribed directly from Caterham build and assembly manuals and presented in the manual's own units, with the bolt size and source shown on every answer so nothing is taken on trust.
SevenSense is an independent reference tool and is not affiliated with or endorsed by Caterham Cars. Always confirm safety-critical figures against the official manual for your car.
Questions or feedback? See Support or email support@racetracs.com.